SCB-1200

After 2 years of research, development and testing, B W Manufacturing, Inc. has produced the only mid-sized ride on scarifying / shot blasting machine in the market today. The SCB-1200 gives you mobility and versatility by being able to switch from scarifying to blasting in just minutes. With a state of the art scarifying head that is self-leveling to automatically adjust itself to different contours of the floor or pavement, you will achieve an accurate removal of thin mill coatings to 1/4” overlays. The SCB-1200 is ideal for use on rubber membranes, mastics, epoxy coatings, and line stripes.

Scarifier

SCB-1600

After 10 years of research, development, and testing, BW Manufacturing, Inc. has produced the only ride-on scarifying / shot blasting machine in the market today. The SCB-1600 gives you mobility and versatility by being able to switch from scarifying to blasting in just minutes. With a state of the art scarifying head that is self-leveling to automatically adjust itself to different contours of the floor or pavement, you will achieve an accurate removal of thin mill coatings to 1/4" overlays. The SCB-1600 is ideal for use on rubber membranes, mastics, epoxy coatings, and line stripes.

Scarifier

SB-6 Shot Blaster

The SB-6 portable, light weight shot blast machine features an easy to adjust handle allowing you to push or pull the SB-6. This feature allows you the ability to blast in any corner and under any shelving and machinery. The horizontally fed blast wheel design leaves a tapered blast edge pattern which eliminates any striping effect. With the liners and housing on the SB-6 incorporated into one part, it gives you the ability to replace any and all wear components. By interchanging the rear liner, the SB-6 can blast 4 and 5 inch line stripes in just minutes. When connected to the A-101 Pulse Vac you achieve a virtually dust free shot blast system.

SC-8.5 Scarifier

With the tool-less quick-change cage assembly and choice of hardened steel cutter, carbide cutters or special milling flails with tungsten blades, you can change the function of the machine in only minutes. Uses of the SC 8.5 range from traffic line removal, sidewalk repairs, coating preparation, removal of epoxy and urethane coatings, creating non-slip surfaces, grinding high spots to cleaning floors of dirt and oils. The six-shaft configuration allows for: (1) more cutters per loading and increased grinding action, (2) fewer cutter changes and more production plus (3) smoother drum rotation which leads to less machine vibration.

A101 Pulse Vac

Unlike other industrial vacuums, the A-101 Pulse-Vac is designed specifically for the removal of fine dust and powders without clogging. By using time tested proven technology of compressed air to pulse clean the filter (which has become the most efficient means of cleaning filters), the A-101 Pulse Vac is the only portable vacuum in the market to use a compressed air pulsation system to continually flush the dust and debris every time.

DG-4.5 Diamond Grinder

Applications and Features :

• Grinding
• Coating removal
• Trim work
• Vertical walls
• Durable steel shroud
• Removable side for edge work
  
  

DG-70 Diamond Grinder

Applications and Features :

DG-700 Diamond Grinder

Applications and Features :

M-24 Magnet Sweeper

The new ergonomically designed Magnetic Sweeper is manufactured with the shot blaster in mind.

Standard Features :