Edco Concrete Floor & Surface Preparation

Edco Concrete Floor & Surface Preparation

Chisel - ALR2™, ALR4™, ALR5™ Air-Powered EDCO Chisel Scalers eliminate hammers, chisels and hand labor! Features: Quick-change, hardened steel tool chuck accepts dozens of accessories Available in heavy-duty steel or lightweight aluminum Requires only 6-8 CFM at 80-90 PSI . Removes: Tiles (vinyl, ceramic, quarry...)accepts dozens of accessories Carpeting Roofing materials Fireproofing Rubber coatings Waterproofing Linoleum Insulation Asbestos Mastics Paint build-up Ice		Chisel Scaler - ALR5 Ergo™ EDCO Chisel Scalers eliminate hammers, chisels and hand labor! Features: Ergonomic design lets operator stand upright eliminating backaches accepts dozens of accessories High-strength tubular handle and soft foam hand grips for operator comfort Quick-change, hardened steel tool chuck accepts dozens of accessories Available in heavy-duty steel or lightweight aluminum Requires only 6-8 CFM at 80-90 PSI . Removes: Tiles (vinyl, ceramic, quarry...)accepts dozens of accessories Carpeting Roofing materials Fireproofing Rubber coatings Waterproofing Linoleum Insulation Asbestos Mastics Paint build-up Ice

Single Disk Grinder- SEC™ EDCO Grinders -Proven in over 40 years of use. Accept no substitute! The portable Single-Disc Grinder will grind approx. 200-250 sq. ft./hr /w EDCO Dyma-Serts. Features: 11" working width Gasoline or electric power option Includes 1 multi-accessory disc, which accepts Dyma-Serts, Strip-Serts and other grinding accessories Ideal for: Areas less than 1,500 square feet Residential applications Removing mastics, sealers & high spots		Dual Disk Grinder- 2EC2GC™ EDCO Grinders -Proven in over 40 years of use. Accept no substitute! Dual-Disc Grinder will grind appox. 350-500 Sq. ft./hr at 1/32" /w EDCO Dyma-Serts. Features: 22" working width Gas, electric & propane power options available Includes 2 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories Counter-rotating discs prevent machine from pulling side to side and give operator greater control Ideal for: Large or small areas Light grinding or cleaning of concrete surfaces Leveling uneven joints Removing mastics, thin-set, high spots, epoxies and urethanes Lightly texturing slippery concrete surfaces

Four Disk Grinder - 411™ 411- Four-Disc Grinder EDCO Grinders - Proven in over 40 years of use. Accept no substitute! Features: 36" working width with 4 sq. ft. of surface contact Gas, electric or propane power sources available Includes 4 multi-accessory discs, which accept Dyma-Serts, Strip-Serts and all other grinder accessories 4 counter rotating discs are double neoprene mounted for smooth, even action 12 grinding accessories required per loading Fast controlled grinding for larger areas Ideal for: Production grinding and floor cleaning on large slab surfaces such as airports, warehouses, parking decks, manufacturing plants, malls and sports arenas		Electric Edge Grinder - EDG7™ 411- Four-Disc Grinder EDCO Grinders - Proven in over 40 years of use. Accept no substitute! Features: 7" diamond cup wheel comes standard and is set off center to allow for maximum dust collection 11-gauge tubular steel handle is extra wide for comfortable working position and easy maneuverability 2HP electric motor supplies high-speed grinding action Improving production rates for the floor coatings professional Ideal for: Grinding within 1/4" of a vertical surface Getting off your hands and knees Improving production rates for the floor coatings professional Grinding along walls, around columns, pipes or in corners

Power Trowels™ Power Trowels - Concrete Rugged, dependable EDCO Power Trowels save contractors time, labor and money. Features: Available in 24", 30", 36" & 46" Heavy-duty steel construction Operator belly bar Quick change blades or bolt-on blades system available Equipped with centrifugal clutch Twist knob pitch control Deadman E-stop switch Optional Level-It system available		Air Powered 3head Scabbler - CD#™ Features: Delivers 1,200 hits per minute for fast surface removal Requires only 100 CFM at 100 PSI Heavy-duty 1/4" steel frame 2" Vacuum Port for dust-free operation Automatic in-line oiler WHIPCHEK Cable assures safe air hose hookup Ideal for: Removing spalling concrete Roughening surfaces for new overlayments Reducing high spots Creating wheelchair access ramps Removing epoxy Creating slip-resistant surfaces Texturing parking garage ramps Removing loose or deteriorated concrete Removes 3/16" of concrete per pass

Head Scabbler - CD55™ Features: Delivers 1,200 hits per minute for fast surface removal Requires only 160 CFM at 100 PSI Heavy-duty 1/4" steel frame Wide T-Grip Handle and 8" wheels for superior balance and handling 3" Vacuum Port for dust-free operation Automatic in-line oiler WHIPCHEK Cable assures safe air hose hookup Ideal for: Removing spalling concrete Roughening surfaces for new overlayments Reducing high spots Creating wheelchair access ramps Removing epoxy Creating slip-resistant surfaces Texturing parking garage ramps Removing loose or deteriorated concrete Provides 11 1/2" working width – Remove up to 250 square feet of concrete per hour		Scarifier - CPM8™ Features: Up to 8" working width (20 cm.) Up to 1/8" working depth per pass (3 mm.) Power source over drum to eliminate vibration and maximize surface contact Compact design Front-mounted lifting handle makes loading and unloading easy Vacuum port equipped Water misting system standard Ideal for: Sidewalk repair Coating removal Floor preparation or cleaning Creating nonslip surfaces Removing epoxy Creating slip-resistant surfaces Traffic line removal Covers 350-500 sq. ft./hr - (33-46 sq. m./hr) at a depth of 1/8" (3mm.)

Tile Shark™ Features: Folding handle in easy transport and/or storage mode folds to 20" to easily fit into a car trunk Sharktooth wrench for easy blade changes Heavy-duty steel material deflector shield Multiple position hand hold assembly Heavy-duty flexible rubber isolators Belt-driven oscillating blade system Quick release pin angle adjustment 7-Gauge steel welded construction Push plate & built-in weight make material removal a quick & easy job Pinch blade system accepts floor stripper blades of any make & size Large non-stick phenolic wheels Steel-mounted wheel scraper High strength tubular handle Weighs 149 lbs.		TG7™ EDCO Grinders - Proven in over 40 years of use. Accept no substitute! Features: 7" diamond cup wheel comes standard and is set off center to allow for maximum dust collection 11-gauge tubular steel handle is extra wide for comfortable working position and easy maneuverability 2HP electric motor supplies high-speed grinding action Improving production rates for the floor coatings professional Ideal for: Grinding within 1/4" of a vertical surface Getting off your hands and knees Improving production rates for the floor coatings professional Grinding along walls, around columns, pipes or in corners

The Big Stick™ Air-Powered EDCO Chisel Scalers eliminate hammers, chisels and hand labor! Features: High-strength tubular handle and soft foam hand grips for operator comfort Extra large piston for harder hitting action Quick-change, hardened steel tool chuck accepts Big Stick accessories Big Stick available in heavy-duty steel or lightweight aluminum Requires 12-15 CFM at 90 PSI Removes: Tiles (vinyl, ceramic, quarry...) Carpeting Roofing materials Fireproofing Rubber coatings Waterproofing Linoleum Insulation Asbestos Mastics Paint build-up Ice		Traffic Line Remover - TLR7™ EDCO Grinders - Proven in over 40 years of use. Accept no substitute! ! Features: 7" diamond cup wheel comes standard and is set off center to allow for maximum dust collection 11-gauge tubular steel handle is extra wide for comfortable working position and easy maneuverability 2HP electric motor supplies high-speed grinding action Improving production rates for the floor coatings professional Ideal for: Grinding within 1/4" of a vertical surface Getting off your hands and knees Grinding along walls, around columns, pipes or in corners

Vacuum - Vac120 The EDCO VAC-120 Vacuum System can be used for dust control with EDCO Grinders, and Hardscape Saws in a variety of working environments. * Optional HEPA filter available for EDCO systems * Optional Wand Kit for floor cleaning available Features: Bypass Motor Technology 120 CFM Vacuum w/modular Plastic Body 6-Gallon Capacity Bag Vacuum Dual Motor Bag Filtration System 3-Stage Filtration 10'-2"Hose		Vacuum - Vac160 EDCO Vacuum Systems can be used for dust control with EDCO Grinders, Scarifiers, Scabblers & Masonry Saws in a variety of indoor and outdoor working environments. * Optional HEPA filter available for EDCO systems * Optional Wand Kit for floor cleaning available Features: Electric 110 volt dual motor Vac system ideal for fine dust removal 6 gallon capacity Hand truck mounted 95" of water lift 2" vacuum hose 180 CFM